# Cannot adjust 3d tile location **URL:** \ **Category:** Cesium ion\ **Created:** [April 17, 2024, 8:48am UTC](https://community.cesium.com/t/cannot-adjust-3d-tile-location/31511 "2024-04-17T08:48:21Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![AMO\_3DSU](https://sea2.discourse-cdn.com/cesium/user_avatar/community.cesium.com/amo_3dsu/32/14000_2.png) [@AMO\_3DSU](https://community.cesium.com/u/AMO_3DSU)\ **Post date:** [April 17, 2024, 8:48am UTC](https://community.cesium.com/t/cannot-adjust-3d-tile-location/31511/1 "2024-04-17T08:48:21Z")
I tried to adjust the 3d tile model in cesium. In the beginning, everything alright. I clicked the “Adjust tileset location”, change the latitude and longitude, and saw the model moved to the right location successfully. However, when i closed the platform and opened again, i found that the model was not placed on the right position. When i click zoom in, the system keep zooming to the initial position which is wrong. Also, the model couldn’t be loaded. I check the setting in “Adjust tileset location”, everything correct and i saw the coordinate logo (x,y,z axis) was placed on the right location. Also, I would like to ask if i download the model after adjust tile location, is it keep in the file? ---
**Author:** ![mdc9001](https://sea2.discourse-cdn.com/cesium/user_avatar/community.cesium.com/mdc9001/32/15919_2.png) [@mdc9001](https://community.cesium.com/u/mdc9001)\ **Post date:** [April 19, 2024, 1:28pm UTC](https://community.cesium.com/t/cannot-adjust-3d-tile-location/31511/2 "2024-04-19T13:28:22Z")
Welcome to the Cesium community @AMO_3DSU ! I understand you are trying to geo-locate an asset using the _Adjust tileset location_ button. In order to help can you provide us with some additional information: - Were there any error messages displayed (either in the user interface or the developer console if you know how to access that) - Can you confirm that you pressed the _Save_ button in the bottom left hand corner of the page before using the _Back to Assets_ link? It can be easy to miss at the bottom. - Can you provide the asset id of the asset you were trying to geolocate? After you adjust the tileset position, the download will be updated (it does need to re-process the download which could take some time depending on the asset). Please let us know if that resolves your issues, or if you have additional concerns. Regards ---
**Author:** ![mdc9001](https://sea2.discourse-cdn.com/cesium/user_avatar/community.cesium.com/mdc9001/32/15919_2.png) [@mdc9001](https://community.cesium.com/u/mdc9001)\ **Post date:** [April 19, 2024, 1:45pm UTC](https://community.cesium.com/t/cannot-adjust-3d-tile-location/31511/3 "2024-04-19T13:45:04Z")
I also moved this to the Cesium ion section since it is specific to locating assets in Cesium ion