Check out these two threads, they’re similar issues.
Uploading: image.png…
revit created a model with a pipe diameter less than 100mm, and the derived 3dtiles could not be detected by radiation in UE, which could be detected by other models
Hi,
I’m using Cesium tile sets exported from Agisoft Metashape and need an as photorealistic representation of the photogrammetry data set as possible. This is why I try to have the highest level of detail possible e.g. I have currently set the Maximum Screen Space Error to 1.0 and I have enabled "Enforce Culled Screen Space Error" etc.
Also I want to mark spots in a tile set using line trace by channel e.g. to measure the distance between two points.
Unfortunately it seems that if the level …
You might be able to fix your problem with the suggestion of @Kevin_Ring in this post: Some models are collision-free - #10 by Kevin_Ring
I personally wasn’t able to fix it with the Cesium tiles and had to go back to using static meshes that I place in the world with a Globe Anchor Component
1 Like